babab
New Member
Posts: 1
|
Post by babab on Oct 19, 2011 21:41:15 GMT -5
Hi,
I'm new to this message board and have a question about the 6-button keypad: is there a way to program the raise/lower buttons to directly control a local load that does not have its own separate dimmer, i.e., use those two buttons in place of a separate dimmer? I haven't found a way to do this in Essentials 5.0.1...
Thanks, babab
|
|
Bailey
Full Member
San Diego Lutron Representative
Posts: 172
|
Post by Bailey on Oct 20, 2011 9:17:48 GMT -5
The raise/lower buttons are only designed to r/l the last button pushed. It allows for all the scenes/loads represented on the keypad to operate with dimming. The third party integrators may chime in with another way to make what you are asking happen, but I believe the R/L will still dim the the last button pushed within the Ra2 system independent of third party controls.
|
|
|
Post by maguire on Oct 20, 2011 17:04:33 GMT -5
You can "lock" the raise and lower buttons to a specific load or loads.
In the programming screen, click on the raise or lower button, change the selected button type to "Raise Programmed Device" instead of "Raise last button pressed", and simply pick the device(s) you want premanently associated with the R/L buttons on the hybrid...
|
|
Bailey
Full Member
San Diego Lutron Representative
Posts: 172
|
Post by Bailey on Oct 21, 2011 13:19:03 GMT -5
as a PSP I should have known that... thanks maquire
|
|
|
Post by axmitaqoy on Nov 6, 2019 22:21:30 GMT -5
|
|
|
Post by otenamapi on Nov 6, 2019 23:21:54 GMT -5
|
|