|
Post by hanshi on Nov 3, 2011 21:15:46 GMT -5
Posting from mobile so I don't have the release notes to attach but this is the latest beta version which includes all of the new products but has fixes for issues seen with 5.0.1. Please download and try it out. If you see any issues, feel free to PM me.
Best Regards!
Hanshi
|
|
Bailey
Full Member
San Diego Lutron Representative
Posts: 172
|
Post by Bailey on Nov 4, 2011 10:37:56 GMT -5
New Features & Fixed Issues in 5.0.8 Design 1. A Maestro ELV dimmer (RRD-6NE) can be converted to an adaptive dimmer (RRD-6NA). This option is found by right-clicking an ELV dimmer in the design screen room viewer and choosing “Convert to Adaptive Dimmer,” or by opening the “Edit Device” window for an ELV dimmer and clicking on “Convert to Adaptive Dimmer.” Note 1: You will need to activate the adaptive dimmer after converting the ELV dimmer in the GUI. Note 2: You cannot convert an adaptive dimmer back to an ELV dimmer. Program 1. Labels have been added to Main Repeater phantom buttons 76-100 to indicate they are reserved for integration with security panels. Fixes 1. On certain jobs, one or more devices would fail during every database transfer. This issue has been fixed. 2. Converting a dimmer to a hybrid keypad caused the GUI to crash. This issue has been fixed. 3. Changing the load type for a lamp dimmer or plug-in dimmer to non-dimmed caused the GUI to crash. This issue has been fixed. 4. After adding a new timeclock mode, a user could not program a button to control the new timeclock mode unless they restarted the GUI. This issue has been fixed. 5. The “Remote Access Address” field is now visible on the “Find Main Repeater” window at any screen resolution. 6. After an activation or a transfer, the GUI was using 50-100% of the CPU, which was causing peformance issues and can prevent subsequent transfers from working properly. This issue has been fixed. 7. Free-standing PICO keypads will not display a faceplate model number in the toolbox or reports. 8. Prices have been corrected for PICO pedestals on the Bill of Materials report. 9. A transfer to a Main Repeater could cause the Main Repeater to reset. This issue has been fixed. Copyright ©2011 Lutron Electronics Co., Inc., All rights reserved 2 10. When choosing a PICO button configuration for a shade PICO keypad, switching between engraving styles could cause the GUI to crash. This issue has been fixed. 11. The GUI did not save the “Randomize” option for timeclock modes. This issue has been fixed. 12. The GUI did not create new green modes properly in projects created prior to RadioRA 2 version 4.2.8. This issue has been fixed. 13. Shared scenes programmed as toggle buttons will display room status instead of scene status. New Features & Fixed Issues in 5.0.1 Design 1. The new low-cost Radio Powr Savr occupancy sensor is available. 2. Over 30 new models of PICO keypads are available. 3. Support for PICO table top pedestals have been added to the software. 4. PICO keypads can now be ganged with Designer-style devices in a wall station. 5. New button kits (-W3BSRL, -W4S and -W5BRL) are supported for seeTouch keypads. There is a single icon in the toolbox to choose which button kit you want to add to the system. 6. New button kits (-H1RLD, -H2RLD, -H3BSRL, -H4S and -H5BRL) are supported for Hybrid keypads. There is a single icon in the toolbox to choose which button kit you want to add to the system. 7. A collection of non-system connectors and the dimmable lamp plug have been added to the “Accessories” section of the toolbox. The devices will be displayed on the Device Installation report and the Bill of Materials report. 8. Users can now set the fixture wattage, fixture quantity, and load type for non-system dimmers. 9. Support for cellular shades has been added to the software. Cellular shades are programmed exactly like roller shades in the software. 10. Support for the TouchPRO WirelessTM Thermostat has been added to the software. 11. Support for the Celsius seeTemp keypad has been added to the software. Celsius seeTemp keypads, like Fahrenheit seeTemp keypads, need to be attached to an HVAC controller or a TouchPRO WirelessTM Theromstat to activate your devices. 12. Support for choosing a temperature scale (Celsius or Fahrenheit) has been added to the Lutron HVAC Controller and TouchPRO WirelessTM Thermostat. Note 1: For new projects, the temperature scale will default based on the country you choose in the project setup guide. Copyright ©2011 Lutron Electronics Co., Inc., All rights reserved 3 Program 13. Support for shared scenes has been added to the program screen. Shared scenes allow users to create scenes that can be reused throughout the home. Each project will include an “All On” scene and an “All Off” scene for all lighting zones in the home. Buttons can now be programmed to activate or toggle a shared scene. Timeclock events can activate a shared scene. Note 1: This feature is only supported in the “Inclusive” version of the software. 14. Timeclock events can now be programmed to activate green modes. In addition to normal level programming, green modes allow you to set a Green Trim for dimmers. Green Trim reduces the light level of a dimmer throughout its dimmed range, in order to save energy. Green timeclock events can save additional energy by turning off unneeded lights and controlling shades. This feature requires dimmers shipped from Lutron after January 1, 2011. 15. Buttons, contact closure inputs and occupancy sensors can be programmed to set HVAC controller heat/cool setpoints in Celsius or Fahrenheit. 16. When Away mode is enabled for HVAC controllers, you can set the heat/cool setpoints in Celsius or Fahrenheit. 17. HVAC event schedules for each HVAC controller in the system can be programmed in Celsius or Fahrenehit. 18. When programming green buttons, the Eco Mode for HVAC controllers can be set in Celsius or Fahrenheit. 19. APM settings for dimmers can now be accessed on the program screen by right-clicking a dimmer in the room viewer and choosing “Advanced Settings.” 20. Timeclock events can now be sorted. Events can be dragged and dropped to change the order in the GUI. Activate 21. Support for remote activation by serial number has been added to the activate screen. Users can type in a serial number for a device in the activation screen grid to activate a device. Note 1: This feature is not supported for auxiliary repeaters, PICO keypads, sensors, and the TouchPRO WirelessTM Theromstat. 22. The activation screen grid has a new column to “Identify” a device that has been activated. When this option is clicked for a dimmer, its load will flash. When this option is clicked for a shade, it will wiggle. 23. The activation screen grid can be sorted by any column to make it easier to identify devices in the grid. The grid will be sorted by default to display unactivated devices at the top. Copyright ©2011 Lutron Electronics Co., Inc., All rights reserved 4 Shades 24. Support for setting shade limits has been added to the software. This feature allows for setting shade Open and Close limits using the RadioRA 2 software, and will work with all shade types. Note 1: This feature is only supported on RF Shades shipped September 2011 or later (RF Antenna software version 4.30 and QS Shade software version 2.20). 25. Support for configuring shade Intelligent Hembar Alignment (IHA) has been added to the software. This feature allows for configuring the speed of adjacent roller shades using the RadioRA 2 software, and will work with all roller shades. Note 1: This feature is only supported on RF Shades shipped September 2011 or later (RF Antenna software version 4.30 and QS Shade software version 2.20). Diagnostics 26. Support for RF Diagnostics in a RadioRA 2 system has been added in this version. Users will be able to view the current state of all devices in the system. Note 1: Using this feature requires devices shipped after January 1, 2011 Note 2: This feature will not work with any Visor Control Receivers shipped prior to this release. Note 3: This feature will not work for sensors and PICO keypads. Remote Access 27. Support for remotely transferring to a RadioRA 2 system has been added in this version. Users should enter the Remote Access Address used for their VPN connection in the "Find Main Repeater" window. Note 1: This feature is only supported in the “Inclusive” version of the software. Reports 28. Advanced filtering options have been added to the Bill of Materials report. Users will be able to filter this report by rooms, devices, and faceplates. 29. The “Keypad Programming Report” has been added to display programming for all keypads in the system. Fixes 30. Database transfer to VCRXs does not work. Copyright ©2011 Lutron Electronics Co., Inc., All rights reserved 5
|
|
|
Post by davethewave on Nov 9, 2011 9:42:15 GMT -5
I have downloaded 5.0.8 successfully two times. Unfortuneatly I have not had success with the transfer to the main repeater I am wondering if anyone else is having this problem?
|
|