|
|
Post by schalliol on Nov 27, 2012 22:10:57 GMT -5
In the recent software updates, now lights using Picos with raise/lower can individually be set to be unchanged from the raise lower effect. With an On, Off, and Preset Pico, some should be able to be set for unchanged. This clearly would be possible to do given the raise/lower to unchanged setting.
|
|
|
|
Post by maguire1 on Nov 28, 2012 17:22:52 GMT -5
In my software ,5.6.6., I was able to program lights as "unaffected" on all button types ( ON, OFF, PRESET, Raise + Lower )
|
|
|
|
Post by schalliol on Nov 29, 2012 0:26:34 GMT -5
Amazing! There's no drop down on the % items, but I now see you can type Unaffected! Wow! Thanks so much! Case Closed!!!
|
|
|
|
Post by maguire1 on Nov 29, 2012 10:22:05 GMT -5
Mine has a drop down with Unaffected below 0%. Very Strange.
|
|
|
|
Post by schalliol on Dec 1, 2012 23:30:25 GMT -5
I see that now too, thanks! I usually use the table at the bottom where there are no dropdowns for dimmers but there are in other cases.
|
|
