|
Post by sbsmarthomes on Feb 25, 2013 13:28:47 GMT -5
Need a way to integrate control of some 0-10v LED lighting modules with RA2. Wiring goes to a mechanical room, so this doesn't need to be a wall switch type of device.
Are there any native RA2 dimmers that can do 0-10v or an outboard module that can handle the interface between dimmer and LED?
|
|
|
Post by sbsmarthomes on Feb 25, 2013 14:17:28 GMT -5
Called into support and it looks like the GRX-TVI is what I need paired with a neutral dimmer to get the 0-10v output required for the LED modules.
|
|
|
Post by hanshi on Feb 25, 2013 19:15:26 GMT -5
Correct. That is the only RA2 option at this point.
|
|
|
Post by sbsmarthomes on Feb 26, 2013 13:32:55 GMT -5
Thanks hanshi... have some GRX-TVI on order. Should be a fun install. The application is under lighting an onyx bar top with edge lit LED panels.
|
|
|
Post by hanshi on Feb 26, 2013 15:27:20 GMT -5
It does sound fun! Keep me posted on how it goes.
|
|
|
Post by neurorad on Aug 20, 2013 13:29:41 GMT -5
I'm also considering the GRX-TVI, for control of under-cabinet lighting.
Someone has stated that the GRX-TVI relays are LOUD, like 'ker-KLUNK' loud.
How loud are they, in reality? Plan would be to install the GRX-TVI inside a kitchen cabinet, behind a door.
Thanks.
|
|
|
Post by sbsmarthomes on Aug 22, 2013 9:18:14 GMT -5
The relay is loud and will click whenever the lights are turned all the way on or off (not while dimming). It will be very noticeable if located in the cabinet. The one I installed was in a separate mechanical room with a shared wall and you can still hear the relay click through the wall.
|
|
|
Post by neurorad on Sept 12, 2013 11:05:04 GMT -5
|
|