Help! I need dbxmlinfo.xml file

[yoshiguy]

Hi,

I'm working on integration software to the radiora2 but I do not have all the possible device to do my testing.

Curious if anyone can send me your dbxmlinfo.xml

if you have one or more the following devices
Sivoia® QS Wireless shades
seeTouchwall-mounted keypads
seeTouch tabletop keypads
Pico wireless controls
wall-mounted hybrid keypad
tabletop lamp dimmer
plug-in dimming module
GRAFIK Eye® QS Wireless control units
Fan controls
seeTemp
TouchPRO Wireless
HVAC controller

please email the xml file to [e-mail]

thank you

[hanshi]

You do not need to have every device physically present. All you need is a test database with the devices that you need, one or two Main Repeaters (depending on what you are hopi ng to test) and one device to activate to the system. Follwo the below (from the XML App Note on the Resource Site):

Steps to extract XML
1) Design and program your project in the RadioRA 2 Essentials or Inclusive software.
2) Connect to your Main Repeater via IP.
3) Click on the Activate tab.
4) Click the “Start Activation” button
5) Activate at least 1 device to enable the Transfer tab.
6) Exit Activate mode.
7) Transfer database to Main Repeater.
8) Go to http://<MainRepeaterIPAddress>/DbXmlInfo.xml on your web browser, where <MainRepeaterIPAddress> is the IP address assigned to that Main Repeater.
• When using a static IP address, the IP Address is set in the RadioRA 2 software.
• When using a dynamically assigned IP address (DHCP), the IP address can be obtained from your router’s DHCP table. Refer to your router’s documentation for details.
• Example: 192.168.2.105/DbXmlInfo.xml
9) Click on the File menu at the top of the page.
10) Select Save As.
11) Save XML file to your desired location.