|
Post by maguire on Dec 23, 2010 14:56:13 GMT -5
When programming a MC button, instead of having to go through every room and find all the loads( right hand side of programming screen), would be nice to select a "summary" view. This summary view could have all of the available loads listed like:
House ABC>Living Room>Sconces House ABC>Living Room>Recessed Lights House ABC>Living Room>Table lamps
In summary view, loads as well as levels and fade time columns could be listed. This would make adding 50 dimmers to a m/c button very easy.
my 2c
|
|
|
Post by feenypower on May 25, 2011 23:07:54 GMT -5
Great idea! It would also help make sure that the one device out of 150 you didn't check the box for hidden somewhere in 25+ rooms on an 'away' scene doesn't come back to haunt you with a service call. On that note, it would be nice to see a 'select all devices' option for scenes like this. The above summary view would be helpful to modify 'sleep' or 'wake' scenes from a pasted 'away' with out having to scroll through multiple rooms, too
|
|
|
Post by maguire on Apr 24, 2012 23:14:13 GMT -5
I would also like to see an "Apply to All" checkbox on the summary screen. Ex. When changing a Green Button Trim from 25% to 10%, I would like to check, "Apply to All", instead of changing each dimmer trim one by one. ex. Type "10", arrow down, Type "10" arrow Down etc etc etc, could be easily replaced by one simply Checkbox. When programming a MC button, instead of having to go through every room and find all the loads( right hand side of programming screen), would be nice to select a "summary" view. This summary view could have all of the available loads listed like: House ABC>Living Room>Sconces House ABC>Living Room>Recessed Lights House ABC>Living Room>Table lamps In summary view, loads as well as levels and fade time columns could be listed. This would make adding 50 dimmers to a m/c button very easy. my 2c
|
|
Bailey
Full Member
San Diego Lutron Representative
Posts: 172
|
Post by Bailey on Apr 26, 2012 4:56:07 GMT -5
McGuire- thanks for brining this up again. Check the available reports for your original request, there is now a button programming report that does exactly what you originally asked for. Your idea for "check to apply to all" is a good one. There are now the "shared scene" and "shared toggle" selections in programming that allow or changes to the global scenes to only be affected once, then automatically shared across the buttons that relate to that specific global scene. You even can create your own global scene label, such as "landscape" or "welcome" as you need, that the software will remember job to job. You just need to program each of the buttons each time.
|
|
|
Post by maguire on Apr 27, 2012 12:36:46 GMT -5
Unfortunatley, shares scenes are only applicable to L2's / PSP's, and I still would have to change each dimmer level manually when programming the shared scene.
It's not a huge deal, but when changing a scene with 65 devices on it, it would sure make it a little more efficient.
If I had a choice, I would spend my "engineering points" on making remote access a little easier, and the engraving manager would be nice too, this would be farther down my list for sure
Thanks for reply
|
|