|
|
Post by Jimm Reifsnyder on Jan 24, 2011 12:24:58 GMT -5
Some good additions. Attachments:
|
|
|
|
Post by maguire on Jan 24, 2011 15:20:34 GMT -5
Looks great, the interface is better and better each update. Too bad the green button will not work in my own RA2 installation. I bought my dimmers last year. ( Dec 2010)
|
|
|
|
Post by Jimm Reifsnyder on Jan 24, 2011 16:50:01 GMT -5
I'm in the same boat. That is actually the first thing that jumped out to me. I have an email out to see if there is any kind of exchange program, I doubt it but I'd figured I would try.
|
|
|
|
Post by maguire on Jan 24, 2011 17:32:17 GMT -5
Backwards compatibility is very important, as it allows a call back to current clients to 'upgrade' the functionality of their system. I would've waited 3 weeks to order dimmers if I knew...
|
|
Bailey
Full Member
San Diego Lutron Representative
Posts: 172
|
Post by Bailey on Jan 24, 2011 17:39:03 GMT -5
Backwards compatibility is very important, as it allows a call back to current clients to 'upgrade' the functionality of their system. I would've waited 3 weeks to order dimmers if I knew... There's still a way to limit the "gain" on the dimmers, it's just permanent within the program. Right-click on the dimmer in the "design" tab of the program and you can set the high gain down to 50% and set the low gain up to 25%. Not the "Green" button that we would like, but accomplishes the same thing. |
|
|
|
Post by Jimm Reifsnyder on Jan 24, 2011 18:11:40 GMT -5
I ran the firmware update today on my home system and noticed a few things.
I noticed the firmware update seemed to go faster, and the actual file transfer seemed to go faster.
iPad app up and running at home, and I have to say it is pretty cool.
|
|
|
|
Post by bradkas on Jan 24, 2011 21:07:18 GMT -5
I don't have an iPad nearby to check this out - are the home owner editing features intuitive?
Thanks
Brad
|
|
|
|
Post by Jimm Reifsnyder on Jan 24, 2011 23:27:01 GMT -5
It's pretty easy you just click show level editor and then the button you want to adjust, then hit save. It's pretty cool since it is real time. Please see attached. Attachments:
|
|
|
|
Post by fiasco on Jan 25, 2011 2:27:44 GMT -5
Did they correct main rep integration buttons not reporting a status change?
|
|
|
|
Post by fiasco on Jan 25, 2011 18:14:10 GMT -5
Must have had a major issue in 4.0.8 since they yanked it.
|
|
Bailey
Full Member
San Diego Lutron Representative
Posts: 172
|
Post by Bailey on Jan 25, 2011 18:49:27 GMT -5
I noticed that it downloaded very quickly. It is off the resource site for the time being... I never get rid of the last version just in case the new one crashes.
|
|
|
|
Post by Jimm Reifsnyder on Jan 25, 2011 19:42:46 GMT -5
There is an issue if the customer made changes with their iPad. Wasn't properly saving the changes. I ran the update and made changes to my system, seemed to work great.
Fiasco still waiting on an answer for your question.
|
|
|
|
Post by fiasco on Jan 26, 2011 23:25:38 GMT -5
Jimmy,
Appears to be fixed
|
|
|
|
Post by Jimm Reifsnyder on Jan 26, 2011 23:58:07 GMT -5
Fiasco let me know if you run into any issues. I have a savant dealer who gave 2 thumbs up, but id like to verify.
|
|
