|
Post by bradkas on Feb 7, 2011 22:25:30 GMT -5
Hi there,
I was curious, are scenes created on phantom buttons editable through the Lutron iPad app?
This could be great for updating 3rd party integration buttons/scenes.
Thanks, Brad
|
|
|
Post by Jimm Reifsnyder on Feb 8, 2011 9:20:39 GMT -5
Brad, I just tried it on my system at home and I got the following error: "Editing this keypad is not supported"
I will shoot out an email to tech and see what I get back.
|
|
|
Post by maguire on Feb 8, 2011 9:57:00 GMT -5
If it's REALLY important to the client, make a keypad that exists in the system, but does not exist physically. Example...
Add a 15 button TT keypad to the system, program it, skip "activation", but transfer the system. The keypad and all it's programming will be available in the repeater ( and also the iPad app)...
Instead of referencing a Phantom Button from your touchscreen etc, reference the non existent keypad, with it's scenes...
|
|
|
Post by Jimm Reifsnyder on Feb 8, 2011 16:51:22 GMT -5
I actually tried adjusting the levels on a keypad that I had added in the software but had not activated. For some reason it would not let me adjust the scene levels on that keypad. I will try again this evening.
|
|
|
Post by bradkas on Feb 8, 2011 19:55:00 GMT -5
Thank for you the replies.
I wouldn't necessarily say it would be important to the client, but would like an accurate answer to give to an integrator if asked.
Brad
|
|
|
Post by Jimm Reifsnyder on Feb 8, 2011 23:03:11 GMT -5
I stand corrected I got home tonight and I was able to change the levels. Not sure why it didn't work this morning.
|
|
Bailey
Full Member
San Diego Lutron Representative
Posts: 172
|
Post by Bailey on May 21, 2012 21:12:11 GMT -5
Newest Version of the app also supports editing the time clocks that are programmed. Very helpful for end-users and time saving for the programmers.
|
|
|
Post by maguire on May 22, 2012 10:13:27 GMT -5
I tried to edit a "virtual keypad" in my system last night and the app wouldn't let me edit an "unactivated" keypad App is up to date RA2 is up to date I stand corrected I got home tonight and I was able to change the levels. Not sure why it didn't work this morning.
|
|
Bailey
Full Member
San Diego Lutron Representative
Posts: 172
|
Post by Bailey on May 23, 2012 13:25:15 GMT -5
I tried to edit a "virtual keypad" in my system last night and the app wouldn't let me edit an "unactivated" keypad App is up to date RA2 is up to date I've had the same problem. I'll ask around at Lutron.
|
|