|
|
Post by hanshi on Feb 15, 2013 14:28:57 GMT -5
The 6.0.0 version of the RadioRA 2 programming software has now been posted on the old RadioRA 2 Resource Site and myLutron.
New Features include:
- programming for the Fan Control (RRD-2ANF)
- Engraving Manager and Engraving Report
- Extraction (Inclusive only)
- convert regular scenes to shared scenes (Inclusive only)
|
|
|
|
Post by beotownsend on Feb 16, 2013 0:37:25 GMT -5
Yay! Was beginning to think 6.0 was vaporware...
|
|
|
|
Post by hanshi on Feb 16, 2013 11:19:47 GMT -5
Oh now, keep the faith! ;-)
|
|
|
|
Post by griffithjerryl on Feb 17, 2013 13:34:31 GMT -5
Easy "dumb question" about Essentials 6.0. Short list equipment to set up visual of project scope. Main Repeater, 2 Auxillary Repeaters, VCRX, 2 Visor Remotes, 2 - 12 Button Key Pads, 2 - 6 Button Key Pads, 6 - 3BRL's, Elk-912 Relay connect GE Concord Security control to VCRX to flash exterior lights and lock on interior lighting and 40 or so 6D Dimmers and 8ANS Swithces.
SIMPLE QUESTION; Adding 15 more Dimmers, 3 Switches & couple Vacancy sensors and few more 3BRL's to the project I added several devices last evening under 5.6. Updated to 6.0 and UNABLE GET NEW DEVICES ACTIVATED with 6.0. PLEASE tell me the simple 1,2,3 steps you use to Activate 6D's and 8ANS's and 3BRL's??? Know you think I'm dumb but am techy that just missing something in the steps. Maybe getting Alzheimers or dementia. Thank you for help on this project. You guys have been awesome with your posts. I got the ELK-912 Relay info from an Electrical Engineer on this site. AWESOME.
|
|
|
|
Post by griffithjerryl on Feb 18, 2013 16:00:44 GMT -5
I have another comment about remote access to Lutron lighting controls. I can access my security cameras and see them from anywhere in the world I have phone signal or WiFi with a FREE iPhone/iPad app. I can completely control my pool systems, see temp of air and water, see salt reading, program pumps and lights to on and off times plus program the Polaris and many other functions all FREE. Never had any that PPTP or VPN issues to deal with. The security cameras did require some configuration of the Router but it had instructions on port numbers and how to configure the Router. Considering Zodiac/Jandy makes their connections all FREE and Vitek security DVR and camera access is FREE i was really surprised see a $60 charge from Lutron when so many remote control apps for security and pools are FREE. Doubt my info here going to be an influence on Lutron but thought someone should know Lutron is different from most major companies with access control apps. Lutron is an awesome product.
|
|
|
|
Post by Davethewave9 on Feb 18, 2013 22:19:14 GMT -5
Has anyone loaded the 6.0 ? Just wondering if there are any bugs
|
|
|
|
Post by jweitzman on Feb 18, 2013 22:48:27 GMT -5
Seems to be working fine for me.
|
|
|
|
Post by Jeff on Feb 18, 2013 23:16:18 GMT -5
I'm having a problem uploading to Main Repeater with 6.0. I, able to upload with 5.6  |
|
Bailey
Full Member
San Diego Lutron Representative
Posts: 172
|
Post by Bailey on Feb 19, 2013 18:13:52 GMT -5
I'll be playing with my demo case tonight. I'll post up any problems.
|
|
|
|
Post by davethewave11 on Feb 19, 2013 20:28:53 GMT -5
Anyone get the remote access to successfully allow to enable and sign up. I got as far as the screen prior to enable remote access. When I go to configure system the system crashes.
|
|
dinom
New Member
Posts: 26
|
Post by dinom on Feb 19, 2013 20:34:28 GMT -5
I'm having trouble too. When I go to add the system, I get a message that pops up saying the system couldn't connect to the Internet to enable remote access. I have no idea what to do.
Locally, the system works fine from the new app.
|
|
|
|
Post by davethewave12 on Feb 20, 2013 11:09:33 GMT -5
If it is any consolation, I am also stuck with the same message at the same place. I guess they have 75 days to work this out before they charge us for  |
|
dinom
New Member
Posts: 26
|
Post by dinom on Feb 20, 2013 12:13:32 GMT -5
I read elsewhere that the Lutron "server" is down, that is what is causing the issue. They weren't sure when the system would be up again.
|
|
|
|
Post by griffithjerryl on Feb 20, 2013 21:30:35 GMT -5
I'm running 6.0 Essentials and iPhone App 5.0 but I have not tried connecting through Lutron Server. I'm using the Dynamic DNS to connect secure though my router configured ports. I am having odd problem with not being able to activate new devices. I'm adding 18 devices to an existing system of 25 devices. Having difficulty getting new devices to appear during activation process plus it hangs and runs long time on final activation step and never shows me the new devices. Same problem with 5.6 Essentials. I'm clearly missing a step. Have them set up in the design phase with proper device model. Would someone tell me what I am missing as reason I am not seeing devices to activate. They work fine and show up on my iPhone 5.0 App..I just can't control them. Appreciate anyone giving me KEY to activation after Design other than run Activation.
|
|
dinom
New Member
Posts: 26
|
Post by dinom on Feb 21, 2013 7:40:22 GMT -5
Update info from Lutron:
IMPORTANT NOTE ON REMOTE ACCESS FEATURE:
Some customers have reported issues when setting up the new remote access feature after upgrading to RadioRA 2 6.0.x. We have determined the cause of the issue, and the solution should be in place by 10AM EST on February 21st.
If you receive an error in the Lutron Home Control+ app indicating "Could not connect to the internet":
On Feb 21, after 10AM EST, power cycle each main repeater on site
Re-add the system to the app (using the same instructions that are in the FAQ today)
** Please note that the most recent versions of the app for Android/iOS will continue to work on a WiFi connection to the local network, even if remote access is not set up. Remote access through a VPN connection is still supported, and is recommended for remote access until the resolution is implemented.
|
|
